Sliding door fitting, Slido Design 40-V/80-V, set

for 1 and 2-leaf wooden sliding doors, wall installation, concealed running system, for door weights up to 40/80 kg

  • Sliding door applications
  • Slido – Sliding door fittings from Häfele

    Häfele supplies sliding door fittings for any application under the Slido brand.

    These fittings are particularly outstanding because of the wide range of different combination options.

     
     
    • Slido sliding door systems are available for wall mounting or ceiling installation
    • There are many different facing options for Slido sliding door systems
    • Slido sliding door systems can be used for door weights from 40 to 240 kg
    • Slido sliding door systems are also available with electric drive

    Sliding door applications

    Fittings for wooden sliding doors
    • Space-saving room elements block the view of the areas behind them
    • Combination with coloured surfaces
    • Modern room design

    Variants:

    Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered

    Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room

     
     
    Fittings for glass sliding doors
    • Space-saving room elements
    • Brightness and transparency in the rooms
    • Modern room design using coloured or textured glass
    • Combination with fixed glass panel elements

    Variants:

    Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered

    Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room

     
     
    Fittings for folding walls
    • Space-saving room elements
    • Room division
    • Large passageways can be partitioned off
    • Space-saving, folded door stack when open

    Variant:

    Fold – these fittings are suitable for creating folding walls

     
     

    Soft closing systems from Häfele

    Häfele supplies a full range of soft closing mechanisms for hinged doors, flaps and also for sliding doors.

    Their ease of installation is truly impressive, and also have the following advantages when they are being used:

    • Noise reduction
    • Lower accident risk
    • Increased operating convenience
    • Material-friendly
    • Sliding doors that close gently and quietly increase comfort in the living and working environments.
     
     
  • Information on wooden sliding doors
  • Fittings for wooden sliding doors

    Our product range includes fittings for wooden sliding doors with a maximum door weight of 500 kg.

    Fittings for wooden sliding doors consist of a fitting set and a running track. If necessary, further components can be added.

    Door leaf connection
    • Clamped door leaf connection
    • Screwed on door leaf connection
    • Recessed door leaf connection

    The door leaf is attached by groove mounting the fitting into the edge of the door. This makes the attachment invisible, and also reduces the gap sizes to a minimum.

     
    installation
    • Support profile – Flange clipThe suspension carriage is inserted or clipped into the support profile from the side (without tools).
    • Support flangeSupport flanges, suspension bars and the two-way suspension fitting are inserted from the side or the front. They are fitted to the door, which increases the installation height.
     
     
    Floor guides
    • Standard floor guidesThe floor guide is groove mounted into the edge of the door leaf. A small amount of play is required in the groove width with this type of floor guide.
    • Clear threshold floor guideA clear threshold floor guide is an adjustable guide that can be individually adapted to any door thickness/groove width within the adjusting range.
    • Guide trackSliding doors can be optionally guided in a guide track at the bottom.
     
     
    Track buffers/track stoppers
    • Stop buffer without retaining spring.
    • Track buffer with retaining spring.The retaining spring allows the sliding door to be held in a closed or open position.
     
     

    Opening options with wooden and glass sliding doors

    Sliding door fittings can be differentiated according to the number of leaves and the type of opening.

    A

    1-leaf sliding doors

    The door is opened to one side in front of a wall

    B

    1-leaf sliding doors

    The door is opened to one side into a wall pocket

    C

    2-leaf sliding doors (e.g. Hawa Telescopic)

    Parallel opening of two door leaves to the right or to the left

    D

    2-leaf sliding doors (e.g. Slido Classic Synchro or Hawa Symmetric)

    Symmetrical opening of two door leaves; manually or automatic

    E

    4-leaf sliding doors (e.g. Hawa Telescopic)

    Parallel opening of two door leaves and simultaneous symmetrical opening

    of all four door leaves (only wooden sliding doors)

    F

    1 and 2-leaf curved sliding doors

    Curved sliding doors can be realised using curved running tracks and a special fitting. The segment size of a door leaf must not exceed a quarter circle

    Soft and self closing mechanism variants for sliding doors

    Soft and self closing mechanism on one side, preferably at the closing side, fitting comes with minimum door leaf width information

    Soft and self closing mechanism on both sides,fitting comes with minimum door leaf width information

    Filter

    Complete your selection

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    NONE Min. 1

    940.42.000 Fitt.set Design 40-V Var.E1

    for 1 and 2-leaf wooden sliding doors, wall installation, invisible running system, for door weights up to 40 kg –, with soft and self closing mechanism on both sides, door width ≥680 mm, version E1, wall distance 12 mm

    940.42.102 Fitt.set Design 40-V var.E2

    for 1 and 2-leaf wooden sliding doors, wall installation, invisible running system, for door weights up to 40 kg –, with soft and self closing mechanism on both sides, door width ≥680 mm, version E2, wall distance 18 mm

    940.82.000 Fitt.set Design 80-V vers.E1

    for 1 and 2-leaf wooden sliding doors, wall installation, invisible running system, for door weights up to 80 kg –, with soft and self closing mechanism on both sides, door width ≥680 mm, version E1, wall distance 12 mm

    940.82.168 Fitt.set Design 80-V var.E2

    for 1 and 2-leaf wooden sliding doors, wall installation, invisible running system, for door weights up to 80 kg –, with soft and self closing mechanism on both sides, door width ≥680 mm, version E2, wall distance 18 mm

    940.82.171 Fitt.set Design 80-V var.A1

    for 1 and 2-leaf wooden sliding doors, wall installation, invisible running system, for door weights up to 80 kg –, door width ≥500 mm, version A1, wall distance 12 mm

    Product details

    Finish

    Silver coloured anodized

    Suitable for

    For wooden doors

    Area of application

    For private residential areas
    for 1-leaf and 2-leaf sliding doors

    Version

    Invisible running equipment integrated in door

    Door weight

    40-V ≤40 kg; 80-V ≤80 kg

    Adjustment facility

    Height + 3 mm

    Installation

    Recessed wall mounting with wall distance 12 or 18 mm
    Product Features

    Order reference

    Order 2 sets for 2-leaf sliding doors.

    Required products
    Complementary products and accessories
    Häfele China Co., Ltd.
    No. Jia 25, Yu Hua Road
    Area B, Tianzhu Airport Industrial Zone
    Beijing, 101318
    China
    Tel: +86 10/8048 2686
    Fax: +86 10/8048 2885
    E-Mail: info_bj@hafele.com.cn
    2021-01-24

    Sliding door fitting, Slido Design 80-V, set

    for 1 and 2-leaf wooden sliding doors, wall installation, invisible running system, for door weights up to 80 kg –

    • Section running gear and floor guide

    • Wall mounting

      Wall distance 12 mm

    • For wall mounting

      Wall distance 18 mm

    • Cut-out dimension

    Note: The image may show a similar article