- Home
- Products
- Furniture, Kitchen & Living Solutions
- Connectors & Shelf Supports
- Connectors
- Connector housing, System Rafix 20, with dowel, zinc alloy

Connector housing, System Rafix 20, with dowel, zinc alloy
With tightening element











- Rafix connector housing overview
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Only one drill hole
- Small design
- With or without rim (zinc alloy housing available only with rim)
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Can be used for alignment, the dowel provides accurate positioning
- Better pull-out strengths
- Valuable, robust appearance
- Shelf connector housing made from plastic
- Shelf connector without dowel
- Without tightening element
- With design and drilling dimensions identical to Rafix 20
- Tightening in slightly angled position
- Installation and removing by pushing on and lifting the connecting bolt, no tools required
- With rim
- Connector housing made from plastic
- Connector housing with dowel
- With tightening element made from zinc alloy for tightening and fixing of the components
- Can be used for alignment, the dowel provides accurate positioning
- High tolerance range (± 0.5 mm), compensation through long tightening distance (2.5 mm)
- High pull-out strengths
- For heavy loads
- Rafix 20 and 30 mounting options
- Rafix 20/Rafix Tab 20 quick comparison information
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Only one drill hole
- Small design
- With or without rim (zinc alloy housing available only with rim)
- Shelf connector housing made from plastic
- Shelf connector without dowel
- Without tightening element
- With design and drilling dimensions identical to Rafix 20
- Tightening in slightly angled position
- Installation and removing by pushing on and lifting the connecting bolt, no tools required
- With rim
Rafix 20 | ![]() | ||
![]() | |||
Rafix 20 Tab | ![]() | ||
Rafix 30 | ![]() | ||
Montage
Die Verbindergehäuse Rafix 20 und 30 weisen zur Aufnahme eines Verbindungsbolzens zwei Ausführungen auf:
(1) ohne Wulst: | ![]() | ![]() | (2) mit Wulst: | ![]() | ![]() | |||||
Die Konstruktionsbödenkönnen stirnseitig und von oben eingesetzt werden. | Die Konstruktionsböden können nur von oben eingesetzt werden; dadurch sind die Bauteile vorfixiert. | |||||||||
![]() | |
Durch die spezielle Konstruktion der Gehäuse ist ein Zugriff von oben auf das Anzugselement möglich. Dadurch können die Verbinder, z.B. bei Bodentablaren, verdeckt eingebaut und über eine 10-mm-Durchgangsbohrung verspannt werden. Die Durchgangsbohrung wird danach mit einer Abdeckkappe verdeckt. Das Anziehen des Verbinders von unten erfolgt komfortabel durch 25°-Stellung des Schraubendrehers. |
Rafix 20 | ![]() | ||
Rafix 20 Tab | ![]() | ||
-
Technical documents available.
Please select an article to view.
Filter
Complete your selection

Häfele China Co., Ltd. No. Jia 25, Yu Hua Road Area B, Tianzhu Airport Industrial Zone Beijing, 101318 China Tel: +86 10/8048 2686 Fax: +86 10/8048 2885 E-Mail: info_bj@hafele.com.cn |

Connector housing, Rafix 20 N system, with dowel, zinc alloy, with ridge
With tightening element –
Optional: 10 mm through hole for locking from above
Rafix 20 with dowel











Note: The image may show a similar article
Note
Please select an article via the features or article table in order to add it to the basket.

